MS-type servo wire EDM machine

◆ The machine tool’s X and Y axes are driven by Japanese Panasonic servo motors, enhancing machining accuracy. ◆ The T-shaped bed is manufactured using resin-bonded sand casting and undergoes two high-temperature heat treatments, effectively controlling machine tool deformation. ◆ Precision linear guides from Taiwan and precision ball screws with double nuts from Taiwan are employed to maintain mechanical accuracy over the long term. ◆ Low-voltage, non-resistive, constant-current high-frequency power supplies are used for cutting operations, resulting in leading domestic performance in key process metrics such as cutting efficiency, surface roughness, and molybdenum wire wear. ◆ A constant-voltage power supply with narrow pulse width and high current is utilized for tool dressing, significantly improving the stability, consistency, and overall process performance of multi-pass cutting. ◆ Rational, environmentally friendly, enclosed structural design.

service@jierui-group.com

+86 15105458622

Category

Wire Electrical Discharge Machining Machine

Leave a Message Online More Products

MS-type servo wire EDM machine

◆ The machine tool’s X and Y axes are driven by Japanese Panasonic servo motors to enhance machining accuracy.
◆ The T-shaped bed is manufactured using resin-bonded sand casting and undergoes two high-temperature heat treatments, effectively controlling machine tool deformation.
◆ Adopts precision linear guides from Taiwan and precision ball screws with double nuts, ensuring long-term maintenance of mechanical accuracy.
◆ Processing and cutting are performed using a low-voltage, resistance-free, constant-current high-frequency power supply, resulting in process performance metrics—such as cutting efficiency, surface roughness, and molybdenum wire wear—that are among the best in China.
◆ A constant-voltage power supply with a narrow pulse width and high current is used for tool dressing, significantly enhancing the stability, consistency, and process performance of multi-pass cutting.
◆ Rational environmentally friendly enclosed structural design.

Technical Specifications

Project/Machine Tool Model	MS-350	MS-450	MS-500	MS-630
Workbench dimensions	520×740mm	560×840mm	680×1000mm	780×1200mm
Worktable X and Y axis travel	350×450mm	450×550mm	500×630mm	630×800mm
Maximum Load Capacity	300kg	500kg	600kg	800kg
Maximum straight-line cutting thickness	280mm			400mm
X and Y minimum instruction unit	0.001mm
Tapered U and V-axis travel (linear guide taper)	30×30 (workpiece 80 mm, 6 degrees on one side)
Control and Connection Methods	Servo Motor Control
Z-axis control	AC geared electric lift
Number of coordinated control axes	X, Y, U, and V axes
Maximum stroke of the silk storage cylinder	200mm
Electrode wire diameter range	φ0.15–φ0.20 mm (standard configuration: 0.18 mm)
Wire feed speed	1–11.4 m/s (frequency-conversion adjustable)
Processing accuracy	±0.005 mm
Maximum cutting efficiency	>160 mm²/mir
Optimal Surface Roughness	Ra ≤ 1.0 μm
Liquid tank volume	90L
Working fluid filtration method	Fine filtration with paper core
Power supply	3-phase, 380 V ±10%; 50 ±1 Hz
Control System	Autocut
Total power consumption of the machine tool	1.5kW
Maximum Processing Current	8A
Host weight	1600kg	1800kg	2800kg	3200kg
Machine tool dimensions (length × width × height)	160012002000mm	190014002000mm	210016502200mm	230020002300mm
Electrical cabinet dimensions (length × width × height)	7506501900mm