CNC3545 CNC Electrical Discharge Machining (EDM) Punching Machine

◆ Equipped with an ultra-high-definition 17-inch computer monitor. ◆ Suitable for machining a wide range of conductive materials, including stainless steel, quenched steel, cemented carbide, copper, aluminum, and more. ◆ Low power consumption; capable of machining holes with diameters ranging from 0.2 to 3 mm, with a maximum depth-to-diameter ratio exceeding 300:1. ◆ Process parameters are digitally controlled, eliminating traditional DIP switches for reduced failure rates and simplified operation. ◆ The worktable features a high-quality marble top that is wear- and pressure-resistant, while maintaining an elegant and sophisticated appearance. ◆ High cutting power, with a maximum machining speed of 30–60 mm/min. ◆ Can directly machine through inclined and curved surfaces, using tap water as the working fluid; a recirculating water tank is available for reuse. ◆ Equipped with automatic edge alignment, automatic centering, internal-hole centering, and angular positioning functions. ◆ The spindle is driven by a DC servo motor, enabling rapid lifting and lowering with excellent hole-piercing stability. ◆ Utilizes Taiwan’s latest circuit PCBs and a high-speed SMLS circuit, resulting in burr-free machined surfaces, low failure rates, and easy maintenance. ◆ The rotary head employs alloy end-face sealing technology and toothed belt drive, ensuring quiet operation. ◆ X, Y, and Z axes are equipped with Hanjiang precision ground ball screws. ◆ The X, Y, and Z axes, along with their auxiliary strokes, utilize precision linear guides. ◆ X and Y axes are driven by AC hybrid servo motors, offering fast travel speeds, high positioning accuracy, excellent stability, and low noise levels. ◆ Bearings are Harbin C-grade thrust bearings, and the system incorporates China’s most advanced networked CNC punching machine control system. ◆ Comes standard with a manual lubrication device and a 100% penetration detection system.

service@jierui-group.com

+86 15105458622

Category

High-speed perforating machine

Leave a Message Online More Products

Wire EDM in the DK series

◆ Equipped with a 17-inch ultra-high-definition computer monitor.
◆ Suitable for machining a wide range of conductive materials, including stainless steel, quenched steel, cemented carbide, copper, aluminum, and more.
◆ Low power consumption; hole diameters range from 0.2 to 3 mm, with a maximum depth-to-diameter ratio exceeding 300:1.
◆ Digitization of machining parameters eliminates traditional DIP switches, resulting in a lower failure rate and greater simplicity and convenience.
◆ The countertop is crafted from exquisite marble, offering exceptional wear and pressure resistance while exuding a sleek, elegant aesthetic.
◆ High power consumption; maximum machining speed can reach 30–60 mm/min.
◆ Can be directly inserted through inclined or curved surfaces, using tap water as the working fluid; a recirculating water tank can be used for reuse.
◆ Functions such as automatic edge alignment, automatic centering, internal bore centering, and angular positioning.
◆ The spindle is equipped with a DC servo motor, enabling rapid lifting and lowering and excellent punching stability.
◆ Adopts Taiwan’s latest circuit PC board and high-speed SMLS circuit, resulting in a burr-free machined surface, low failure rate, and easy maintenance.
◆ The rotary head employs alloy end-face sealing technology and toothed belt drive, ensuring silent operation.
◆ The X, Y, and Z axes are equipped with Hanjiang precision ground ball screws.
◆ The X, Y, and Z axes’ travel distances, as well as the auxiliary travel, utilize precision linear guides.
◆ X and Y utilize AC hybrid servo motors, offering high travel speed, high positioning accuracy, excellent stability, and low noise.
◆ The bearings are Harbin C-grade thrust bearings, and the system is equipped with the most advanced domestically produced CNC perforating machine system.
◆ Equipped with a manual lubrication system and a 100% penetration inspection system.

Technical Specifications

Parameter Name	Unit	Parameter value
Workbench dimensions	mm	400×500
Clamping electrode diameter	mm	0.15-3.0
Spindle travel	mm	350
Spindle servo travel	mm	350
Number of rotations of the rotary head (C-axis)	Revolutions per minute	220
XXY Itinerary	mm	350×450
Maximum distance between the guide and the worktable	mm	360
Maximum Processing Current	A	30
Enter maximum power	Keyword	3.8
Working fluid tank capacity	L	25
Maximum working fluid pressure	megapascal	10
Machine tool weight	Kilogram	650
Machine tool external dimensions	mm	1300×1300×2300
Working fluid filtration method		Wire-gap type